OUTEX PARTS
Kit
consists of the following Pre cut nipple tapes, seal tape and
protection sheet. Valve,
Gloves, instruction manual and OUTEX sticker. The
materials selected for this kit have been proven to be highly durable with
regards to the heat resistance (up to 140 degrees Celsius), weather resistance
and adhesion. Tape
left over after initial installation can be used for repairs such as spoke
replacement. Installation
of the tubeless kit requires some basic mechanical skills and knowledge. Other
things needed for the installation process: Thinners
or grease/oil dispersant to ensure a thoroughly clean, oil free surface for
adhesion. Scissors, sharp blade, sandpaper and a 1200 watt hairdryer.
. |
|
|
Genuine PEG |
F-PEG Same height as Genuine peg |
4mm UP |
9mm UP |
|
|
SUR-RON@F-PEG Wide@/@Part Number@FP07CW@/ 270 USD. Features of OUTEX.F-PEG ™ Since the F peg has a broader surface and the
sole is always in contact during riding, the load is evenly distributed. ™ The forward and backward motion of the F step
along the axis of the shaft. ™ With a sense of unity between steady footwork
and the body of the motorcycle, cornering stability is improved. ™ Follows all riding positions including
acceleration, deceleration and standing, however the peg load does not
change. ™ Can be raised 4mm or 9mm by using the lower
mounting hole position of the peg. ™ Precision laser cut of the S45C peg material
creates a surface harder than titanium. ™ The block shaped parts forming the F peg axis
uses aluminum A2017. ™ Should damage occur, replacement parts can be
ordered individually. .
. |
Lever
Guard
|
||||||||||||||||||||||||
|
||||||||||||||||||||||||
CNC Machining LEVER GUARDS / Buffing. Product nameFOUTEX.VALG-Z8-18 (Machining single piece
type) Retail Price $120 |
||||||||||||||||||||||||
CNC Machining LEVER GUARDS / Black
anodized. Product nameFOUTEX.VALG-Z8-Black-18 (Machining single
piece type) Retail Price $130 |
||||||||||||||||||||||||
Features of OUTEX LEVER GUARDS š By securing the lever guard itself with a
hexagon stainless adapter, it is possible to secure them better than to use
the aluminum anchor type which is often used in commercially-sold hand
guards. Removal can also be performed smoothly. š Prevents contact with the brake lever of
another rider on the track. (Installation was made mandatory from the MOTOGP
2012) š A duracon slider
has been equipped on the bar end to minimize damage to the lever guards and
left/right levers in the event of a crash. š Lever guards and duracon sliders
are available for purchase separately as service parts.
. |
Strong points
of Spoke booster *Keeps merits
of spoke wheels, but increases stiffness needed on corners. *Gives quick
handling and stability at high speed. *Prevents
nipple loosening and spoke bends. *Stiffness can
be adjusted by number of Spoke booster pieces used on a wheel. *Made of Aluminium 2017 for the body, and stainless for the
bolts and nuts. Spoke booster Front P/N SB1S3S-36-BLACK 170 USD@ Rear P/N SB2S-36-BLACK 170 USD |
Enquiries
in English by email please |
2018”N8ŒŽ4“ú ’}”gƒ[ƒhƒŒ[ƒX‘IŽèŒ ‘æ‚Rí@TC400/TC250‘‡—DŸI
2018”N10ŒŽ13“ú ’}”gƒ[ƒhƒŒ[ƒX‘IŽèŒ ‘æ‚Sí@TC400/TC250‘‡—DŸI
2019”N6ŒŽ1“ú ’}”gƒ[ƒhƒŒ[ƒX‘IŽèŒ ‘æ‚Qí@TC400/TC250‘‡—DŸI
ƒXƒeƒ€ƒXƒ^ƒrƒ‰ƒCƒU[@@ƒtƒƒ“ƒgƒtƒH[ƒN‹‰»ƒXƒvƒŠƒ“ƒO@@ƒAƒ“ƒ_[ƒtƒŒ[ƒ€@@ƒ`ƒ…[ƒuƒŒƒXƒLƒbƒg@@
ƒXƒ|[ƒNƒu[ƒXƒ^[@@ƒŠƒAƒXƒvƒŠƒ“ƒO@@U“®‹zŽûƒŒƒo[ƒK[ƒh@ U“®‹zŽûƒŒƒo[ƒK[ƒhí‚èo‚µƒƒ“ƒs[ƒX@@
‚²‚Á‚‚¢ƒoƒbƒNƒXƒeƒbƒv@@FƒXƒeƒbƒv @FƒyƒO @ƒwƒbƒhƒuƒŒ[ƒX@@KTM690ƒwƒbƒhƒKƒXƒPƒbƒg@@
ƒXƒ^ƒ“ƒhƒtƒbƒN ƒXƒ‰ƒCƒ_[ƒ{ƒrƒ“@@ƒ‚ƒ^[ƒhƒtƒƒ“ƒgƒXƒ^ƒ“ƒh