. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
OUTEX.VALG-Z10L-BLACK@160USD |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
@ Features of the VIBRATION ABSORBER LEVER
GUARDS It is
possible to move the vibration, common in the handle grips of single engine and
twin engine models to the tip of the lever guards (weight adjustment of 56
grams including bolts is possible). Minimizing the vibration in the handles
in this way helps to avoid tired arms and allows the rider to concentrate on
riding during long rides or races. Naturally, this function is possible for
both on-road and off-road motorcycles, as well as mini-bike, naked-bike,
dual-sport, big-bike and so on. By
securing the lever guard itself with a hexagon stainless adapter, it is
possible to secure them better than to use the aluminum anchor type which is
often used in commercially-sold hand guards. Removal can also be performed
smoothly. Prevents
contact with the brake lever of another rider on the track. (Installation was
made mandatory from the MOTOGP 2012) A duracon slider has been equipped on the bar end to
minimize damage to the lever guards and left/right levers in the event of a
crash. Lever
guards and duracon sliders are available for
purchase separately as service parts. VIBRATION
ABSORBER LEVER GUARDS@VALG-Z
series
Please
check your handle inside diameter.
|
Line up
Machining single
piece type thickness 10mm Buffing OUTEX.VALG-Z10@130USD Weight of lever guard single side body 159g ------------------------------------------------------------------------------ Machining single
piece type thickness 10mm Black anodized OUTEX.VALG-Z10 Black@140USD |
Machining single
piece type thickness 10mm Lightweight type Buffing OUTEX.VALG-Z10L@150USD Weight of lever guard single side body 138g ------------------------------------------------------------------------------ Machining single
piece type thickness 10mm Lightweight type Black anodized OUTEX.VALG-Z10L-BLACK@@160USD |
Machining single
piece type thickness 8mm Buffing OUTEX.VALG-Z8@120USD Weight of lever guard single side body 90g |
Machining single piece
type thickness 8mm Lightweight type Buffing OUTEX.VALG-Z8L@140USD Weight of lever guard single side body 82g ------------------------------------------------------------------------------ Machining single piece
type thickness 8mm Lightweight type Black anodized OUTEX.VALG-Z8L
Black@150USD . |
Machining single
piece type thickness 10mm M8 Bolts Black anodized This item are
fastened to the bar ends of handle bars using M8 Bolts directly without Hexagon
Stainless Adapters. This item is for handle bars that bolts are tighten to
bar ends. VALG-Z10-M8-BLACK 120USD . |
|
||
.
. .
. .
. |
Examples of fitting
Ducati-Multistrada |
|
HARLEY-DAVIDSON XL1200S |
Z250 ABS |
250SB |
WR250X |
We are pleased to have our customersfcomments. Lever Guards / OUTEX VALG -X Hello, I am Dennis from Hong Kong. I bought the Outex Lever Guards from
eBay and using it for two months. Here is the review for the nicely made product.
With the nuts and bolts Outex
provided, the Lever Guards nicely attached to my oshiro
handlebar. Very Easy... 2. Your feeling when riding your
motorcycle installed the item on. The Vibration is reduced after installed this Lever Guards. Can
feel it especially when in lower gears and stuck at the traffic jam.
Comfortable for long time riding. Safety when I have a close call. It give much protection to my
hands when I need a close call.
It is a nicely design, good looking, good quality product that
provided me more protection and comfortable when riding.
5 stars Lever
Guard / Brake Clutch VIBRATION ABSORBER Lever Guards / OUTEX VALG -X Absolutely fantastic and unique
product: lever guards, bar end sliders and bar weights all in one. Rugged, well made, with a
significant reduction in vibration. Shipping (to Canada from Japan) was lightening fast with great communication. Would buy this product again and
will certainly buy more from OutEx. Carl - Calgary, Alberta, Canada. |